RSS
热门关键字:
当前位置 :| Home>Technical Manual>

False and inferior antistatic floor product overruns, how to do?

来源: 作者:Stand originally 时间:2008-12-24 Tag: 点击:
Current, because home is antistatic floor competition is too intense, add the element of armor plate skyrocket, manufacturer of a lot of production is serious jerry, false and inferior product is to overrun simply, the competition that do not have foreword created difficult position.

The magic arts with false and inferior jerry product has the following:

1, antistatic floor plate thickness reduces 0.3mm, 0.4mm from 0.8mm, this are jerry antistatic the floor is done not have at all
Have strength, more do not talk to go up reach national level? ! Cause antistatic floor too soft, noise made in coughing or vomiting child noise made in coughing or vomiting child noise, four periphery are short
The cock inside time comes, serious floor ruptures.

2, antistatic the short of that stick a face is antistatic standard, what stick a face namely is antistatic Europe of 1x109 of ~ of 1x105 of systematic resistance short of
Mu, create a floor board not antistatic. Reason surface load door buy for antistatic floor, what actually the client buys is to wear
Empty floor, is not antistatic floor! ! !

3, tall wear-resisting of the short of that stick a face, use time is not long, figure of the face that stick a face already was ground. This kind of surface that sticks a face was not added tall
Wear-resisting paper.
The tall wear-resisting that adds tall wear-resisting paper is antistatic stick a face to have a variety of:
1) the revolution of the wear-resisting that stick a face that adds paper of homebred tall wear-resisting is: Be more than 800 turn;
2) the revolution of the wear-resisting that stick a face that adds paper of entrance tall wear-resisting is: Be more than 1000 turn;
3) the revolution of the wear-resisting that stick a face that adds an entrance to exceed wear-resisting paper is: Be more than 3000 turn;
Every kinds of tall wear-resisting sticks face cost to differ, reason is antistatic the price of the floor is different also.

4, stick phenomenon of bubbly, exuviate more serious, the serious out of control on manufacturing technology causes this. About technical issue of short duration
Keep secret when, the person that have fun at, when inspecting a plant please, introducing in detail.

5, antistatic the ply that sticks a face uses 0.8mm/1.0mm/1.2mm/1.5mm commonly, and southern region can be used
0.8mm/1.0mm/1.2mm/1.5mm, northern region must use 1.2mm above, under this standard sure meeting arises
Problem of a lot of quality. Current, no matter false and inferior product is southern region, have the impertinence to do sth of northern still region uses ply to be
0.5mm, 0.6mm, 0.7mm, so the client buys a product time weak point comes 2 ~ 3 months, long do not come, produce namely
Unripe stick the carapace since the face, case become warped wait for serious quality problem.

6, support board thickness, tube wall ply all differs degree is decreased thin, cause the noise made in coughing or vomiting after be not being propped up child noise made in coughing or vomiting child noise, even floor
最新评论共有 0 位网友发表了评论
发表评论
评论内容:不能超过250字,需审核,请自觉遵守互联网相关政策法规。
用户名: 密码:
匿名?
注册